Memory Riser Assembly; Removing A Memory Riser Assembly - HP Xw8400 - Workstation - 4 GB RAM Technical Reference Manual

Memory riser assembly

This section describes how to remove and install a memory riser assembly.

Removing a memory riser assembly

The following steps describe how to remove a memory riser assembly.
1. Disconnect memory riser cable P93 from the memory fan cable.
Figure 4-25
2. Remove the memory fan/duct assembly. Loosen the assembly thumb screws and remove the
assembly from the chassis.
Figure 4-26
ENWW
Disconnect memory riser cable P93 from memory fan cable
Remove memory fan/duct assembly
Removing and replacing components 73