Using Computer Setup To Reset Cmos - HP Xw8400 - Workstation - 4 GB RAM Technical Reference Manual

6. Reconnect any external devices.
7. Plug in and power on the workstation.
NOTE:
and time will have to be reset.

Using Computer Setup to Reset CMOS

1. To reset CMOS using Computer Setup, access the Computer Setup (F10) Utilities menu. When
the Computer Setup message appears in the lower-right corner of the screen, press the
Press Enter
NOTE:
powered off, then on again, to access the utility.
2. From the Computer Setup menu, select File>Set Defaults and Exit. This restores the soft settings
that include boot sequence order and other factory settings. It does not, however, force hardware
rediscovery.
NOTE:
and time, will have to be reset.
ENWW
The workstation passwords and any special configurations along with the system date
to bypass the title screen, if necessary.
If you do not press the F10 key while the message is displayed, the workstation must be
The workstation passwords and any special configurations, along with the system date
Clearing and Resetting the CMOS 165
F10 key.