Rgs Operating Modes - HP Xw460c - ProLiant - Blade Workstation User Manual

2-11 RGS operating modes

RGS supports two basic operating modes:
1. Normal Mode—This mode enables RGS to connect to a single Remote Computer, as described in Section 2-
8-2, "One-to-one
2. Directory Mode—This mode enables RGS to connect to multiple Remote Computers, as described in Section
2-8-3, "Many-to-one
Remote Computers the RGS Receiver should connect to. Directory Mode is described in Chapter 7,
Directory
NOTE: Prior to RGS 5.2.0, RGS supported a third operating mode—Enterprise Service Mode. Enterprise
Service Mode was based on the creation of a network service which specified which Remote Computers the
RGS Receiver should connect to. Enterprise Service Mode has been superseded by HP Session Allocation
Manager (SAM), and therefore has been discontinued as of the RGS 5.2.0 release.
connection." Normal Mode is described in Chapter 5,
connection." Directory Mode is based on a user-created file which specifies which
Mode."
"Using RGS."
RGS overview 27
"Using