HP Xw460c - ProLiant - Blade Workstation User Manual page 168

RGSENDER_CONNECT
EventID: 4
NOTE: Parameter %2 is new in the RGS
5.1.5 release.
RGSENDER_DISCONNECT
EventID: 5
NOTE: Parameter %2 is new in the RGS
5.1.5 release.
RGSENDER_STARTUP
EventID: 1
RGSENDER_SHUTDOWN
EventID: 2
RGSENDER_SET_PRIMARY
EventID: 6
Event Viewer Example:
Primary connections: 1
Non-primary connections: 0
A new connection was established with an associated name. If Easy
Login is enabled, the name assignment will be deferred until login
and the associated name may be "Anonymous".
Event Viewer Message:
Connect %1.
Strings:
%1 = name associated with connection
%2 = IP address and port number of Local
Computer
Data: None
Event Viewer Example:
Connect MYDOMAIN\my username.
A receiver has disconnected. The message will contain the name
associated with the connection. If Easy Login is enabled and the
receiver disconnects prior to a login, the associated name may be
"Anonymous".
Event Viewer Message:
Disconnect %1.
Strings:
%1 = name associated with connection
%2 = IP address and port number of Local
Computer
Data: None
Event Viewer Example:
Disconnect MYDOMAIN\myusername.
Reference event registered to aid in interpretation of the event log by
Event Viewer. Signifies proper startup of the RGS Sender service.
Event Viewer Message:
RGS Sender startup.
Strings: None
Data: None
Reference event registered to aid in interpretation of the event log by
Event Viewer. Signifies proper shutdown of the RGS Sender service.
Event Viewer Message:
RGS Sender shutdown.
Strings:
None
Data:
None
A connection with an associated name is set as the primary
connection.
Event Viewer Message:
Set %1 as primary connection.
Strings:
%1 = name associated with connection
Data: None
Event Viewer Example:
Set MYDOMAIN\myusername as primary
connection.
Remote Application Termination 168