HP Xw460c - ProLiant - Blade Workstation User Manual page 159

NOTE: Beginning at RGS 5.2.5, the default value of the following property has been changed from 0 to 30.
Rgsender.MaxImageUpdateRate=int
This property limits the number of image updates per second transmitted from the Remote Computer to the Local
Computer. The value is the maximum number of updates per second. If the image update rate is too high, and
using too much network bandwidth, the MaxImageUpdateRate can be set to limit the number of image updates
per second. The default value is 30. To specify no limit on the number of image updates per second, set the
property to 0—this is interpreted to mean that the image update rate should not be limited.
Rgsender.IsBlankScreenAndBlockInputEnabled=bool (1)
If set to 1, this property enables monitor blanking on certain Remote Computers when a primary user logs in from
a Local Computer. This property also enables blocking of input from a keyboard and mouse that are directly
connected to the Remote Computer. If set to 0, monitor blanking is disabled. The default value is 1—monitor
blanking is enabled. For details on monitor blanking, see Section 5-1-4,
operation."
Rgsender.IsIloRemoteConsoleEnabled=bool
This property is supported only on Linux. If set to 0, the iLO (integrated Lights-Out) console is disabled when an
RGS connection is made. This prevents the user's desktop session from being visible through the iLo remote
console. When set to one, the user's desktop session will be viewable through the iLO remote console. The default
is 0—disable viewing of the user's desktop session through iLO.
Rgsender.IsAnonymousConnectionForceEnabled=bool
By default, Easy Login is only enabled on a blade workstation. To enable Easy Login functionality on a standalone
workstation, this property value can be changed from 0 to 1.
CAUTION: Enabling the above property on a standalone workstation Remote Computer may allow a Local
Computer user unauthorized access to the Remote Computer. If Easy Login is enabled via this property, a Local
Computer user can connect to the logged out or locked desktop of the Remote Computer without providing a
username or password. If a user at the Remote Computer console logs in or unlocks the desktop, the anonymous
Local Computer user will be promoted to a primary user.
This will result in the Remote Computer monitor being blanked, and the Remote Computer input disabled. At this
point, the unauthorized Local Computer user will have full control of the Remote Computer, possibly requiring the
Remote Computer user to cycle power on the computer to regain control.
Rgsender.PreferredDisplayMethods=string (GPU ChangeList Comparitron)
Introduced at RGS 5.3.0, this property controls the order of and use of the three methods the RGS Sender may use
to process the video stream prior to sending it to the Receiver. This property should not normally be changed from
the default built into the RGS Sender. Enter the methods in priority order of usage. If a method is not currently
supported in the system, the next method in the list will be tried. The rgdiag tool will report which methods are
supported on Microsoft Windows. (see
"GPU" uses the Graphics Processing Unit (GPU) hardware to quickly compare one full screen to a previous
•
full screen. A specific graphics card and driver are required. The RGS Sender will test for the availability of
the graphics card and driver. This method is supported only on Microsoft Windows Vista and later.
"ChangeList" method uses, in Microsoft Windows, the RGS mirror-driver, and on Linux, the "Remote
•
Graphics" X server extension to detect display changes. Microsoft Vista and later is forced to Basic mode.
Aero mode is not supported.
"Comparitron" method uses the system's CPU to compare one full screen to a previous full screen. This
•
method is supported only on Microsoft Windows. Animated cursors are displayed as a static cursor.
(30)
(0)
Using the RGS Diagnostics Tool on
"Remote Computer monitor blanking
(0)
Windows)
RGS properties 159