Sender Microphone Property - HP Xw460c - ProLiant - Blade Workstation User Manual

Rgsender.IsCollaborationNotificationEnabled=bool
Introduced at RGS 5.2.0, this property allows the user to enable or disable display of the collaboration
notification dialog (see Section 5-5-2,
dialog is displayed. If set to 0, the collaboration notification dialog is not displayed. The default value is 1—
display the collaboration notification dialog.
CAUTION: Caution is advised in disabling the collaboration notification dialog because neither the Remote User (if
present) or the Local Users will be notified who is participating in a collaboration session. Furthermore, if display of
the collaboration notification dialog is disabled, the warning dialog in Figure 5-7 (which is displayed when the
Remote Computer is unable to blank its monitor) will also be prevented from being displayed.
Rgsender.IsReconnectOnConsoleDisconnectEnabled=bool
Introduced at RGS 5.3.0, this property allows the user to enable or disable session reconnection during session
logout or Fast User Switching. Supported on Windows Vista and later. The default value is 1. See
Receiver interoperability

8-6-3 Sender microphone property

Rgsender.Mic.IsEnabled=bool
This property is new with RGS 5.1.3, and is only supported on the Windows Sender. If set to 1, remote
microphone is enabled (on/unmuted). If set to 0, remote microphone is disabled (off/muted). The default value is
1—remote microphone is enabled (on/unmuted).
"Collaboration notification
for more details.
(1)
(1)
dialog"). If set to 1, the collaboration notification
(1)
Sender and
RGS properties 160