HP Xw460c - ProLiant - Blade Workstation User Manual page 181

Directory not found or not
accessible!
User not found in
directory!
Authorization failed!
Error: No license found
for the sender you are
trying to connect to!
Error: License Expired for
the sender you are trying
to connect to!
Error: License Invalid for
the sender you are trying
to connect to!
Setup Mode hotkey
sequence too short.
Setup Mode hotkey
sequence too long.
Setup Mode hotkey
sequence may only
consist of Ctrl, Alt, Shift
and Space.
A space may only be
entered after Ctrl, Alt or
Shift is pressed.
Setup Mode hotkey
sequence is invalid. The
sequence has been reset
to the default.
Setup Mode hotkey
sequence is invalid. The
sequence has been
disabled.
The directory file is not available. Possible reasons include:
1. The directory file name or location has been mistyped.
2. The file has been moved or is no longer available.
3. The network is down or experiencing a disruption.
4. The user does not have read permission on the file.
The username of the current user of the HP Remote Graphics Software
Receiver is not found in the directory file. Possible reasons include:
1. The username entered in the directory file does not exactly
match the real username.
2. The username of the current user is not entered in the directory.
If the directory file is on a shared drive with restrictive
permissions, consult an IT specialist to add the proper entry.
The connection was authenticated, but another user is already logged
into the desktop of the Sender system. When a connection is attempted
to another user's desktop, a dialog is displayed on the Sender desktop
asking the logged in user to allow the connection. A user is not
allowed to connect to another user's desktop unless they are explicitly
authorized. Either the connection was not granted access, or the dialog
timed-out and the connection was implicitly denied.
A license was not found for the RGS Sender.
The license has expired for the RGS Sender.
The license is invalid for the RGS Sender.
The key sequence specified by the user is too short.
The key sequence specified by the user is too long.
The key sequence specified by the user contains invalid keys.
The Setup Mode hotkey sequence cannot start with a space.
The Setup Mode hotkey sequence specified using a property either on
the command-line or in the property configuration file is invalid, and
has been reset to the default.
The Setup Mode hotkey sequence specified using a property either on
the command-line or in the property configuration file is invalid, and
the property
Rgreceiver.Hotkeys.IsMutable
hotkeys have been disabled.
is disabled. Therefore,
RGS error messages 181