The next volume control to adjust is the mixer line in the Recording Control window. The name of this line varies
with different audio devices. See the Windows Sender Audio Installation section for information on how to
determine the name of this control. For our example, the control is called Wave Out Mix. Adjust this volume
control while playing a sound. At higher levels, the audio signal gets clamped and the signal becomes distorted.
Decrease the level until the sound becomes clear. On some devices, the mixer volume control does not go to zero.
In this case, the Wave line of the Volume Control will need to be reduced. Figure 6-9 demonstrates the Wave Out
Mix level needed to eliminate distortion.
Figure 6-9
Recording Control window
Advanced capabilities 102