HP Xw4400 - Workstation - 2 GB RAM Reference Manual page 99

2. Disconnect the data (1) and power (2) cables from the hard drive.
Figure 4-42
3. Lift up on the green drive-lock release tab (1) and slide the hard drive (2) out of the chassis.
Figure 4-43
To install a SAS hard drive:
1. Disconnect power from the system
access panel
ENWW
Removing the hard drive
Removing the hard drive
(Predisassembly procedures on page
(Side access panel on page 62).
Steps for removal and replacement of components
57) and remove the side
89