Using Computer Setup To Reset Cmos - HP Xw4400 - Workstation - 2 GB RAM Reference Manual

6. Reconnect any external devices.
7. Plug in and power on the workstation.
NOTE:
and time will have to be reset.

Using Computer Setup to Reset CMOS

1. To reset CMOS using Computer Setup, access the Computer Setup (F10) Utilities menu. When
the Computer Setup message appears in the lower-right corner of the screen, press the F10 key.
Press Enter to bypass the title screen, if necessary.
NOTE:
powered off, then on again, to access the utility.
2. From the Computer Setup menu, select File>Set Defaults and Exit. This restores the soft settings
that include boot sequence order and other factory settings. It does not, however, force hardware
rediscovery.
NOTE:
and time, will have to be reset.
ENWW
The workstation passwords and any special configurations along with the system date
If you do not press the
The workstation passwords and any special configurations, along with the system date
F10 key while the message is displayed, the workstation must be
Clearing and Resetting the CMOS 157