HP Xw4400 - Workstation - 2 GB RAM Reference Manual page 41

Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
Heading Option
OS Security
Power OS Power
Management
Hardware Power
Management
Thermal
Advanced* Power-On
* Options
ENWW
Description
Universal Unique Identifier (UUID)
Can only be updated if the current chassis serial number is invalid. (These ID numbers are normally
set in the factory and are used to uniquely identify the system.)
Keyboard
Enables you to set the keyboard locale for System ID entry.
Data Execution Prevention
Enables/disables Data Execution Prevention mode in the processors. This mode prohibits code
from running in pages that were set up as data pages, and prevents attacks such as buffer
overflows. Operating system support is required for this feature.
Intel Virtualization Technology
Enables Intel Virtualization Technology to increase workstation performance.
OS Management of Embedded Security Device
Enables/disables the ability of the operating system to control the TPM device. This includes turning
it on/off, initializing it, and resetting it.
Reset of Embedded Security Device through OS.
Enables/disables the ability of the operating system to reset the TPM.
Enables/disables:
● ACPI S3 Support
●
ACPI S3 Hard Disk Reset
●
ACPI S3 PS2 Mouse Wakeup
●
USB Wake on Device Insertion
●
Idle Power Savings
Enables/disables SATA Power Management
Allows you set the rate of the system fan when CPU is in idle.
Allows you to set:
● POST Mode (QuickBoot, FullBoot, or FullBoot every 1–30 days).
●
POST Messages (Enable/Disable).
●
F9 Prompt (Enable/Disable). Enabling this feature will display the text F9=Boot Menu during
POST. Disabling this feature prevents the text from being displayed. However, pressing
the F9 key will still access the boot menu.
● F10 Prompt (Enable/Disable). Enabling this feature displays the text F10=Setup during POST.
Disabling this feature prevents the text from being displayed but pressing
the Setup screen.
●
F11 Prompt (Enable/Disable). Makes the Factory Recovery option visible during POST.
● F12 Prompt (Enable/Disable). Enabling this feature displays the text F12=Network Service
Boot during POST. Disabling this feature prevents the text from being displayed
but pressing F12 still forces the system to attempt booting from the network.
●
Factory Recovery Boot Support (Enable/Disable). Recovery partition (HDD) option available
for Vista. Vista leaves the factory with this support in place.
●
Option ROM prompt* (Enable/Disable). Enabling this feature causes the system to display a
message before loading options ROMs.
F10
Computer Setup (F10) Utility
still accesses
31