HP Xw4400 - Workstation - 2 GB RAM Reference Manual page 100

2. Attach a SAS-to-SATA cable adapter to the connector on the hard drive.
Figure 4-44
3. Push the drive (1) into the selected bay until it snaps into place.
4. Attach the data (2) and power (3) cables to the drive.
Figure 4-45
5. Insert the SAS controller card into an available PCI slot.
6. Connect the data cable from the hard drive (1) to the controller card (2).
90 Chapter 4 Removal and replacement procedures
Attaching the adapter
Installing the SAS hard drive
ENWW