Dual-State Power Button; World Wide Website - HP Xw4400 - Workstation - 2 GB RAM Reference Manual

4. As soon as the workstation powers on, press and hold the
Setup (F10) Utility. Press
NOTE:
and press and hold the
If you are using a PS2 keyboard, you might see a Keyboard Error message—disregard it.
5. If you are using a diskette or other storage device, insert it now.
6. Click File>Replicated Setup>Save to Removable Media. Follow the instructions on the screen
to create the configuration diskette.
7. Download a BIOS utility for replicating setup (repset.exe) and copy it onto the configuration diskette.
To obtain this utility, go to
workstation.
8. On the configuration diskette, create an autoexec.bat file containing the following command:
repset.exe cpqsetup.txt.
9. Power off the workstation to be configured. Insert the configuration diskette, and power on the
workstation. The configuration utility runs automatically.
10. Restart the workstation when the configuration is complete.

Dual-State Power Button

With ACPI enabled, the power button can function either as an on/off switch or as a button. The feature
does not completely turn off power, but instead causes the workstation to enter a low-power standby
state. This allows you to power down without closing applications and to return to the same operational
state without any data loss.
To change the power button configuration:
1. Click Start, and select Control Panel>Power Options.
2. In Power Options Properties, click the Advanced tab.
3. In the Power Button section, select Hibernate. (Hibernate must be enabled in the Hibernate
tab.)
After configuring the power button to function as a button, press the power button to put the system in
a very low power state. Press the button again to bring the system out of the very low power state to full
power status. To completely turn off all power to the system, press and hold the power button for four
seconds.
CAUTION:
responding; turning off the power without operating system interaction could cause damage to or loss
of data on the hard drive.

World wide website

HP engineers rigorously test and debug software developed by HP and third-party suppliers and develop
operating system specific support software to ensure performance, compatibility, and reliability for HP
workstations.
When making the transition to new or revised operating systems, you must implement the support
software designed for that operating system. If you plan to run a version of Microsoft Windows that is
different from the version included with the workstation, you must install corresponding device drivers
and utilities to ensure that all features are supported and functioning properly.
ENWW
Enter
If you do not press the
F10 key again to access the utility.
http://www.hp.com/support/files
Do not use the power button to power off the workstation unless the system is not
to bypass the title screen, if necessary.
F10 key at the appropriate time, you must restart the workstation
F10 key until you enter the Computer
and enter the model number of the
Desktop management 39