C Blade Service Error Codes - HP Bc1500 - BladeSystem - Blade PC User Manual

C
Blade Service Error Codes
The following is a list of possible errors which the blade service writes to the event log file on the
blade PC. If you encountered critical issue on the blade, note the error code and communicate it
to the support team.
BC0001—Internal error accessing WMI. Contact your HP SAM support team.
BC0002—Internal error accessing WMI. Contact your HP SAM support team.
BC0003—Internal error failed to spawn threads, usually due to low memory. Close other
applications or increase memory.
BC0005—Internal error. Contact your HP SAM support team.
BC0006—Internal error, usually due to low memory problems. Close other applications or
increase memory.
BC0007—Update thread failed to spawn. Internal error, possibly due to low memory conditions.
Close other applications or increase memory.
BC0008—Failed to start service (OpenSCManager() error). Make sure the service is running
under the local system account with sufficient permission to start/stop the service.
BC0009—Failed to start service (OpenService() error) Make sure the service is running under
the local system account with sufficient permission to start/stop the service.
BC0010—Failed to start service (StartService() error). Make sure the service is running under
the local system account with sufficient permission to start/stop the service.
BC0011—Failed to start service (status check error). Make sure the service is running under the
local system account with sufficient permission to start/stop the service.
BC0012—Internal error setting up service. Make sure the service is running under the local
system account with sufficient permission to start/stop the service.
BC0013—Service configuration file (tattoo) was not found. See the blade service installation
section above for the list folder where the CFG file must be stored and that the service has read
access to it.
BC0014—Could not find the Gateway section in the configuration file. See the blade service
installation section above on how to create the correct CFG file contents.
BC0015—Internal program error. Contact your HP SAM support team.
BC0016—Internal program error. Contact your HP SAM support team.
BC0017—Internal program error. Contact your HP SAM support team.
BC0018—Internal program error. Contact your HP SAM support team.
BC0020—Memory allocation error. Close other applications or increase memory.
BC0021—Memory allocation error. Close other applications or increase memory.
BC0022—Memory allocation error. Close other applications or increase memory.
BC0023—Internal error. Contact your HP SAM support team.
HP SAM Administrator User Guide www.hp.com C-1