Fan - HP Pro 4300 Maintenance And Service Manual

Fan

The fan is located near the middle of the computer under the main rear cover. The fan is secured with
three Torx screws. You do not have to remove the heat sink to remove the fan.
Figure 6-43
To remove the fan assembly:
1. Prepare the computer for disassembly (see
on page
2. Remove the center access panel (see
3. Remove the memory access panel (see
4. Remove the drive access panel (see
5. Remove the stand (see
6. Remove the optical drive (see
7. Remove the heat sink cover (see
8. Remove the top panel (see
9. Remove the rear cover (see
56 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Fan assembly location
26).
Stand on page
Optical Drive on page
Top Panel on page
Rear Cover on page
Preparing to Disassemble the Computer
Hinge Cover Panel on page
Memory Access Panel on page
Drive Access Panel on page
54).
33).
Heat Sink Cover on page
51).
55).
27).
29).
31).
45).