HP Pro 4300 Maintenance And Service Manual page 49

7. To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1),
then press the SODIMM down (2) so that the latches lock it in place (3).
Figure 6-21 Installing a memory module
NOTE: A memory module can be installed in only one way. Match the notch on the module
with the tab on the memory socket.
8. Press the memory cover back in place. Insert the bottom edge of the memory cover into the
sheet metal shielding first, then press the top edge of memory cover down. Ensure that all the
tabs on the memory cover are pressed firmly against the sheet metal shielding.
Figure 6-22 Replacing the memory cover
The computer automatically recognizes the additional memory when you turn on the computer.
Memory 41