Computer Setup-Power - HP Pro 4300 Maintenance And Service Manual

Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-4 Computer Setup—Power
Option
Hardware Power
Management
Thermal
Description
●
SATA Power Management—Enables or disables the SATA bus and/or device power
management. Default is enabled.
●
S4/S5 Wake On LAN—Wake on LAN (WOL) is normally used to turn on and shutdown
systems remotely. This option wakes the system from S4 (hibernate)/S5 (off) power state
when a Wake on LAN packet is received and follows normal boot order. Default is disabled.
Displays the system fan speed (RPMs).
Computer Setup (F10) Utilities 15