Fan - HP ZBook 15u Maintenance And Service Manual

Fan

Table 6-12 Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the keyboard (see
Remove the fan:
NOTE: To remove the fan you must remove screws from both the top (under the keyboard) and bottom of
the computer.
1. Position the computer upright and open as far as possible.
2. Remove the four Phillips M2.0 × 3.0 screws that secure the fan to the computer.
3. Close the computer and position it upside down.
4. Disconnect the fan cable from the system board (1).
5. Remove the Phillips M2.0 × 3.0 screw (2) that secures the fan to the computer.
6. Loosen the two captive Phillips screws (3) that secure the fan to the computer.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 44).
Keyboard on page 40).
32).
32).
Component replacement procedures
Spare part number
L65691-001
59