Xerox 4050 Installation Planning Manual page 37

Week Activity
•
-2 Inspect and approve site.
•
Order consumable supplies.
•
Minimum supplies needed for
installation:
— Paper (2 cartons)
— Developer (1 carton)
— Fuser agent (2 cartons)
— Dry ink (1 carton)
After installation, you will need to
establish a procedure for ordering
supplies according to your ongoing
production requirements.
-1 Schedule operator training.
•
Install Ensure supplies are available.
•
Ensure system administrators are
available during software
installation.
•
Provide preinstallation checklist
and network address of print server
(or host file containing this
information) to Xerox personnel.
Also, designate two client
workstations if applicable, for Xerox
client software installation.
•
Install DocuPrint system hardware
and software.
•
Load Xerox client software on client
workstations.
•
Have operators available for
training.
•
Check documentation and software
kits for completeness.
•
Have test jobs ready to run.
•
Post- Become familiar with support
install services available.
•
Establish supplies ordering
procedure.
•
Provide ongoing printer controller
and DocuPrint printer maintenance.
•
Adjust the IOT alignment and
magnification.
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 4050/4090 NPS
Table 4-1. 4050/4090 NPS installation planning
checklist (continued)
Reference
Chapter 4, Appendix
A and sales rep
Systems analyst
Chapter 4 and
Appendix A
Chapter 4
Guide to Configuring
and Managing the
System
Appendix B
Appendix B
Appendix A
Guide to Performing
Routine Maintenance
PREPARING FOR INSTALLATION
Date
Responsibility completed
Xerox _________
Customer and Xerox _________
Customer and Xerox _________
Customer _________
Customer _________
Customer _________
Xerox _________
Customer _________
Customer _________
Customer _________
Customer _________
Customer _________
Customer _________
Customer and Xerox _________
_________
Xerox
4-5