Ethernet Lan - Xerox 4050 Installation Planning Manual

PRODUCT OVERVIEW
Client networking software

Ethernet LAN

Token Ring
1-4 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 4050/4090 NPS
•
IBM RS/6000 running IBM AIX, version 4.1
•
HP/Apollo running HP-UX, version 10.01
•
DECStation 5000/200 running DEC Ultrix, version 4.3
•
Apple Macintosh, System 7.x or 8.x, using AppleTalk through
EtherTalk, phase 1 or 2
•
Any system that supports RFC-1179 lpr/lpd.
DocuPrint Model 4050 and 4090 NPS software may be compatible
with workstation models and software versions other than those
listed above.
Xerox client software, a third-party TCP/IP lpr networking software,
Novell, or Apple/Macintosh Printer Access Protocol (PAP)
networking software must be installed on your client workstations or
downloaded from the printer controller. This software provides an
interface with the printer controller, which allows you to submit print
jobs and check job status.
Note: The DocuPrint printing options available to a client user vary
according to the networking software loaded on the client
workstation.
For additional information on submitting jobs from a client
workstation, refer to the Xerox DocuPrint Network Printer Series
Guide to Submitting Jobs from the Client.
Users of networked client workstations may send print jobs to the
DocuPrint NPS printer over the Ethernet LAN using TCP/IP,
AppleTalk using EtherTalk Link Access Protocol (ELAP), or Novell
NetWare 3.1x as the network protocol.
Regardless of printing or transmission protocol, the Ethernet
connection to the printer controller must be compatible with the
Institute of Electrical and Electronics Engineers (IEEE) 802.3
standard.
Users of network client workstations may send print jobs to the
DocuPrint NPS printer over Token Ring network using TCP/IP,
Novell 3.x, or AppleTalk network protocol.
Regardless of printing transmission protocol, the Token Ring
connection to the printer controller must be compatible with the
Institute of Electrical and Electronics Engineers (IEEE) 802.5
standard.