Starting The Scsi Configuration Utility; Main Menu - HP Kayak XA-s02 User Manual

geron.bk : geron-4.fb4 Page 98 Sunday, March 22, 1998 5:03 AM
NOTE
4 Technical Information
Using the SCSI Configuration Utility (Selected Models)

Starting the SCSI Configuration Utility

You access the SCSI Configuration Utility by pressing
message
Press F6 to start Configuration Utility...
displayed during the PC Workstation's start-up routine. A further
message is then displayed:
before the Main menu of the Symbios Logic SCSI
Utility...
Configuration utility appears.

Main Menu

The items shown on your screen may be different from those shown
below.
Symbios Logic SCSI Configuration Utility
MAIN MENU
Port
Num
.SYM53C875 E800
Change Adapter Status.
Adapter Boot Order
Additional Adapter Configuration
Display Mode = Verbose.
Mono/Color.
2
Language .
Help.
Quit.
Use arrow keys to select from menu. Then press ENTER
1. Only used if more than one Symbios card is installed.
2. Not available (English only).
Use the and keys and the
from this menu.
You can only select an adapter if the current status is "On". Changes
are possible only if NVRAM (non-volatile memory on your adapter) is
present.
98 English
Please wait, invoking Configuration
Version 1.07
Irq ------Status------
Level Current Next-Boot
3 On On
1
.
1
.
BIOS Code Segment: C800
key to make a selection
when the
is
NvRAM
Found
Yes