If Your Pc Workstation Has A Software Problem; If You Have Forgotten Your Password - HP Kayak XA-s02 User Manual

geron.bk : geron-3.fb4 Page 68 Sunday, March 22, 1998 5:03 AM
3 Troubleshooting Your PC Workstation

If Your PC Workstation Has a Software Problem

If Your PC Workstation Has a Software Problem

If You Have Forgotten Your Password

If you forget the User Password and the Administrator password is set
and known:
1 Switch off the PC Workstation.
2 Restart the PC Workstation.
3 Wait for the message
4 Press to start Setup.
5 Type the Administrator password to enter Setup.
6 Select Security, the User Password submenu, and set a new User
password.
7 Press to save the new User password and exit Setup.
If you forget both the User password and the Administrator password:
1 Switch off the PC Workstation and remove the computer's cover
(refer to page 23).
2 Set switch 7 (PSWRD) on the system board switch block to ON
(DOWN). Refer to page 91 for the switch location.
3 Replace the PC Workstation's cover and switch on the
PC Workstation. Allow it to complete its startup routine.
4 Switch off the PC Workstation and remove the cover.
5 Reset switch 7 (PSWRD) to OFF (UP).
6 Replace the computer's cover (refer to page 25).
7 Switch on the PC Workstation and allow it to startup.
8 Press when prompted to use Setup.
9 Set new User and Administrator passwords.
10 Press to save the new passwords and exit Setup.
68 English
.
Setup