Connecting The Mouse, Keyboard, Display And Printer - HP Kayak XA-s02 User Manual

geron.bk : geron-1.fb4 Page 3 Sunday, March 22, 1998 5:03 AM
NOTE

Connecting the Mouse, Keyboard, Display and Printer

Connect the mouse, keyboard, and display to the back of the
PC workstation. The connectors are shaped to go in one way only.
Tighten the display cable attachment screws.
Serial B Serial A
Port
Port
Parallel
Connector
Monitor
Connector
Connect the printer cable to the back of the computer and tighten the
attachment screws. Use the connector labeled:
Parallel (25-pin parallel connector) for a parallel device.
•
Serial A (9-pin serial connector) for a serial device.
•
Serial B (9-pin serial connector) for a second serial device.
•
The Universal Serial Bus (USB) connectors can be used for USB
accessories. Most USB accessories are automatically configured as soon
as they are physically attached to the PC Workstation. USB accessories
are not supported by all operating systems.
1 Setting Up and Using Your PC Workstation
Connecting the Mouse, Keyboard, Display and Printer
Mouse
Connector
Keyboard
Connector
2 USB Connectors
(see note below)
English 3