Device Setup Menu - HP Kayak XA-s02 User Manual

geron.bk : geron-4.fb4 Page 104 Sunday, March 22, 1998 5:03 AM
Sync Rate (Mega
Bytes/sec)
Width (bits)
4 Technical Information
Using the SCSI Configuration Utility (Selected Models)

Device Setup Menu

When you select a device from the Device Selections menu, the Device
Setup menu is displayed:
Symbios Logic SCSI Configuration Utility
1. SYM53C875
Dev0 N/A Setup
Sync Rate (Mega Bytes/sec)
Width (bits)
Disconnect
Read Write I/O Timeout (secs)
Scan for Device at Boot Time
Scan for SCSI LUNS
Queue Tags
Format
Verify
Help.
Restore Default Setup
Exit this menu.
Use arrow keys to select from menu. Then press ENTER
This menu provides information about an individual SCSI device.
To make changes to these settings, select an item from the list and
press .
This option lets you set the transfer rate for the device. The available
choices are Off, 10 MB/sec, 20 MB/sec, or 40 MB/sec. For example, for a
Fast SCSI device, you would select 10 MB/sec.
This option lets you set the width, in bits, for the device. The choices are
8 or 16. For example, if the device is an external SCSI device, you would
set the width to 8 bits.
104 English
Version 1.00
BIOS Code Segment: C800
40 MB/sec
16
On
10
Yes
Yes
Enabled
None