HP Kayak XA-s02 User Manual page 38

geron.bk : geron-2.fb4 Page 26 Sunday, March 22, 1998 5:03 AM
Intrusion Monitor
2 How to Install Accessories Inside Your PC Workstation
Removing and Replacing the Cover
4 Lower the latches on the front sides of the cover.
5 If required, lock the cover using the key provided.
6 Reconnect all the power cables.
Your PC Workstation is equipped with an intrusion monitor, which is
located on the front of the PC Workstation, behind the Hardware
Control Panel. It is designed to detect whether your PC Workstation
has been opened since the last time it was used:
If your PC Workstation has been opened, it is assumed that the
•
system configuration has changed and a full start-up check is carried
out.
If your PC Workstation has not been opened, it is assumed that the
•
system configuration has not changed and a reduced start-up check
is carried out.
26 English