geron.bk : geron-2.fb4 Page 27 Sunday, March 22, 1998 5:03 AM
Fan connection to
system board
HP UltraFlow
Airflow Guide
Retaining button
Moving the Power Supply
You can slide the power supply unit out of the computer to improve
access to the system board and the cables at the rear of the disk drives.
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (see page 23).
3 Remove the fan connection to the system board.
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation's case.
5 Unscrew the four self-retaining screws at the back of the power
supply.
Unscrew the
self-retaining screws
2 How to Install Accessories Inside Your PC Workstation
Moving the Power Supply
English
27