Using The Scsi Configuration Utility - HP Kayak XU 03xx Manual

Using the SCSI Configuration Utility

The Symbios Logic SCSI Configuration Utility lets you view and change
the default configuration for your host adapter and all SCSI devices
connected to it, or for individual SCSI devices.
Default Settings You Can Change
The following two tables show the configuration settings you can
change. The first table shows the global settings which impact your
host adapter and all SCSI devices connected to it. Be very careful if you
change any of these settings. The second table shows the device
settings which apply to individual devices.
Settings for the Host Adapter and All Devices
SCAM Support
Parity
Host Adapter SCSI ID
Scan Order
Removable Media Support
Settings for Individual SCSI Devices
Synchronous Transfer Rate (MB/sec)
Data Width
Disconnect
Read Write I/O Timeout (secs)
Scan for Devices at Boot Time
Scan for SCSI LUNs
Queue Tags
HP Kayak XU 03xx PC Workstation Configuring a SCSI Accessory
Default Settings
On
Enabled
7
Low to High (0-Max)
None
Default Settings
40
16
On
10
Yes
Yes
Enabled
English
9