Distinctive Ring/Cwt Pattern Names Section - Cisco Small Business SPA2102 Administration Manual

ATA Voice Field Reference
Regional page
Cisco Small Business ATA Administration Guide
CWT6 Cadence
CWT7 Cadence
CWT8 Cadence
CWT9 Cadence
Voice tab > Regional page >

Distinctive Ring/CWT Pattern Names section

Ring1 Name
Ring2 Name
Ring3 Name
Ring4 Name
Ring5 Name
Ring6 Name
Cadence script for distinctive CWT 6.
The default is 30(.3/.1,.3/.1,.1/9.1).
Cadence script for distinctive CWT 7.
The default is 30(.1/.1, .3/.1, .1/9.3).
Cadence script for distinctive CWT 8.
The default is 2.3(.3/2).
Cadence script for distinctive CWT 9. This field is for the
SPA2102 only.
The default is 30(.3/9.7).
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 1 for the inbound call.
The default is Bellcore-r1.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 2 for the inbound call.
The default is Bellcore-r2.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 3 for the inbound call.
The default is Bellcore-r3.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 4 for the inbound call.
The default is Bellcore-r4.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 5 for the inbound call.
The default is Bellcore-r5.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 6 for the inbound call.
The default is Bellcore-r6.
B
144