Voip Fallback To Pstn Section (Spa3102 And Spa8800); Dial Plan Section - Cisco Small Business SPA2102 Administration Manual

Analog telephone adapters
Hide thumbs Also See for Small Business SPA2102:
Table of Contents

Advertisement

ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide
GW1/2/3/4 NAT
Mapping Enable
GW1/2/3/4 Auth ID
GW1/2/3/4
Password
Voice tab > Line page >

VoIP Fallback to PSTN section (SPA3102 and SPA8800)

On the SPA8800, these settings are configured on the Phone pages only.
Auto PSTN Fallback If enabled, the ATA device automatically routes all calls to
Voice tab > Line page >

Dial Plan section

The dial plan determines how the entered digits are processed.
On the SPA8800, the Line page includes the dial plan fields as described below.
However, on the Phone page, the Dial Plans section provides eight spaces where
you can enter up to eight dial plans. The dial plans in this pool can be associated
with a VoIP Caller or a PSTN Caller. The dial plan syntax is consistent for all fields.
The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[2-
9]xxxxxx| 1 xxx[2-9]xxxxxx| x xxxxxxxxxxx.). The syntax for a dial plan expression is
as follows:
If enabled, the ATA device uses NAT mapping when
contacting Gateway 1.
The default is no.
This value is the authentication user-id to be used by the
SPA to authenticate itself to Gateway 1.
The default is blank.
This value is the password to be used by the SPA to
authenticate itself to Gateway 1.
The default is blank.
the PSTN gateway when the Line 1 proxy is down
(registration failure or network link down).
The default is yes.
B
180

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents