Cisco Small Business SPA2102 Administration Manual page 51

Configuring Your System for ITSP Interoperability
Network Address Translation (NAT) and Voice over IP (VoIP)
STEP 4
STEP 5
STEP 6
Cisco Small Business ATA Administration Guide
Click Voice tab > Line
Scroll down to the NAT Settings section.
•
NAT Mapping Enable: Choose yes.
•
NAT Keep Alive Enable: Choose yes (optional).
Your ITSP may require the SPA device to send NAT keep alive messages to
NOTE
keep the NAT ports open permanently. Check with your ITSP to determine
the requirements.
Click Submit All Changes.
You also need to configure the firewall settings on your router to allow SIP
NOTE
traffic. See "Firewalls and SIP," on page
Voice tab > SIP > NAT Support Parameters
N
, where N is the number of the line interface.
Voice tab > Line N > NAT Settings
53.
3
51