Cisco Small Business SPA2102 Administration Manual page 202

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide
SIP Remote-Party-
ID
SIP GUID
SIP Debug Option
RTP Log Intvl
To use the Remote-Party-ID header instead of the From
header, select yes. Otherwise, select no.
The default is yes.
This field is not available with the PAP2T. The Global
Unique ID is generated for each line for each device. When
it is enabled, the ATA device adds a GUID header in the SIP
request. The GUID is generated the first time the unit boots
up and stays with the unit through rebooting and even
factory reset. This feature was requested by Bell Canada
(Nortel) to limit the registration of SIP accounts.
The default is yes.
SIP messages are received at or sent from the proxy listen
port. This feature controls which SIP messages to log.
Choices are as follows:
•
none—No logging.
•
1-line—Logs the start-line only for all messages.
•
1-line excl. OPT—Logs the start-line only for all messages
except OPTIONS requests/responses.
•
1-line excl. NTFY—Logs the start-line only for all messages
except NOTIFY requests/responses.
•
1-line excl. REG—Logs the start-line only for all messages
except REGISTER requests/responses.
•
1-line excl. OPT|NTFY|REG—Logs the start-line only for all
messages except OPTIONS, NOTIFY, and REGISTER
requests/responses.
•
full—Logs all SIP messages in full text.
•
full excl. OPT—Logs all SIP messages in full text except
OPTIONS requests/responses.
•
full excl. NTFY—Logs all SIP messages in full text except
NOTIFY requests/responses.
•
full excl. REG—Logs all SIP messages in full text except
REGISTER requests/responses.
•
full excl. OPT|NTFY|REG—Logs all SIP messages in full text
except for OPTIONS, NOTIFY, and REGISTER requests/
responses.
The default is none.
The interval for the RTP log.
B
202