Dial Plans Section; Voip-To-Pstn Gateway Setup Section - Cisco Small Business SPA2102 Administration Manual

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide
Voice tab > PSTN Line page (SPA3102) >

Dial Plans section

Dial Plan 1/2/3/4/5/
6/7/8
Voice tab > PSTN Line page (SPA3102) >

VoIP-To-PSTN Gateway Setup section

VoIP-To-PSTN
Gateway Enable
VoIP Caller
Authentication
Method
VoIP PIN Max Retry Number of trials to allow VoIP caller to enter a PIN number
One Stage Dialing
Dial plan script for this line.
The default is (xx.) Dial plans in the dial plan pool to be
associated with a VoIP Caller or a PSTN Caller. Each dial
plan in the pool is referenced by a index 1 to 8
corresponding to Dial Plan 1 to 8. The dial plan syntax is the
same as that used for Line 1. See
page 180.
Enable or disable VoIP-To-PSTN Gateway functionality.
The default is yes.
Method to be used to authenticate a VoIP Caller to access
the PSTN gateway. Choose from {none, PIN, HTTP Digest.
The default is none.
(used only if authentication method is set to PIN).
The default is 3.
Enable one-stage dialing (applicable if authentication
method is none, or HTTP Digest, or caller is in the Access
List).
The default is yes.
B
"Dial Plan section," on
210