Cisco Small Business SPA2102 Administration Manual page 211

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide
Line 1 VoIP Caller
DP
Default VoIP Caller
DP
Line 1 Fallback DP
VoIP Caller ID
Pattern
VoIP Access List
VoIP Caller 1/2/3/4/
5/6/7/8 PIN
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is calling from Line 1 of the same SPA3102
unit during normal operation (in other words, not due to
fallback to PSTN service when Line 1 VoIP service is
down). Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}
Authentication is skipped for Line 1 VoIP caller.
The default is 1.
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is not authenticated. Choose from {none, 1,
2, 3, 4, 5, 6, 7, 8}.
The default is 1.
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is calling from Line 1 of the same SPA3102
unit due to fallback to PSTN service when Line 1 VoIP
service is down. Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}.
The default is 1.
A comma-separated list of caller number templates such
that callers with numbers not matching any of these
templates are rejected for PSTN gateway service,
regardless of the setting of the authentication method. The
comparison is applied before the access list is applied. If
this parameter is blank (not specified), all callers are
considered for PSTN gateway service.
For example: 1408*, 1512???1234.
NOTE: '?' matches any single digit; '*' matches any number
of digits.
The default is blank.
A comma separated list of IP address templates, such that
callers with source IP address matching any of the
templates will be accepted for PSTN gateway service
without further authentication. For example: 192. 1 68.*.*,
66.43. 1 2. 1 ??.
The default is blank.
One of 8 PIN numbers that can be specified to control
access to the PSTN gateway by a VoIP Caller, when the
VoIP Caller Authentication Method
The default is blank.
B
parameter is set to PIN.
211