Fujitsu fi-5530C - Document Scanner Operator's Manual page 97

3. Remove the jammed documents.
Staples, paper clips, etc. cause document jams. Be sure to fully check the
ATTENTION
document and feed path, and remove any small metal objects such as
these.
Also, before you start scanning, be sure to remove any staples, clips, etc.
from the document.
4. Push in the center of the ADF to close it untill the ADF button is locked.
Press the center of the ADF
•
Make sure that the ADF is completely closed. When it is not completely
ATTENTION
closed, document jams or feeding errors may occur.
•
When the scanning is completed at the pre-determined sheet or can-
celed, the documents might remain inside the ADF even though any error
message is not displayed.
Follow the procedure below to remove the documetns remaining in the
ADF.
1. Remove all documents from the ADF paper chute.
2. Open the ADF by pushing down the ADF button.
3. Remove the remaining documents.
4. Push in the center of teh ADF to close it until the ADF button is
locked.
fi-5530C Image Scanner Operator's Guide
5.1 Removing Jammed Documents
5
81