Fujitsu fi-5530C - Document Scanner Operator's Manual page 102

Symptom 3
Is the document loaded correctly
on the ADF paper chute?
Is the ADF closed completely?
Is the interface cable connected
correctly?
Is the connector of interface
cable broken?
(when using scanner on SCSI
interface)
Is the SCSI ID set correctly?
Does the scanning start after
running ON the scanner again?
If you cannot solve the problem
after taking measures, check the
items in "5.4 Items to check before
contacting the dealer where you
bought the scanner" and contact
the dealer or an authorized
FUJITSU service provider.
*) For details, refer to Getting Started "2.2 Connecting the scanner to your PC".
86
The scanning does not start.
NO
YES
NO
YES
NO
YES
YES
NO
NO
YES
YES
NO
Load document correctly on
ADF paper chute.
Close the ADF completely.
Connect interface cable
correctly. (*)
Use a new interface cable
and correctly connect it.
Turn OFF the scanner and set
the SCSI ID correctly, then
turn ON the scanner again.
(*)
The scanner operation is
normal.