Fujitsu fi-5530C - Document Scanner Operator's Manual page 110

Symptom10
Do the documents satisfy the
conditions described under the
"Precautions" in "6.2 Document
Paper Quality"?
Were the documents fanned
before loading into the ADF paper
chute?
Is the paper thickness switch set
on the "Normal" position?
Are all the consumables
(Pick roller and Pad ASSY)
installed correctly?
Is any of consumables
(Pick roller, Pad ASSY) dirty?
Is any of consumables (Pick roller
and Pad ASSY) worn out? (Check
the consumable counter)
If you cannot solve the problem
after taking measures, check the
items in "5.4 Items to check before
contacting the dealer where you
bought the scanner" and contact
the dealer or an authorized
FUJITSU service provider.
*1) For details, refer to "6.2 Document Quality" on page 103.
*2) For details, refer to "2.3 Scanning thin Documents" on page 29.
*3) For details, refer to "4 REPLACING CONSUMABLES" on page 61.
*4) For details, refer to "3.2 Cleaning the ADF" on page 55.
94
The ADF have frequent troubles not picking
documents.
NO
YES
NO
YES
NO
YES
NO
YES
YES
NO
YES
NO
Use documents that satisfy
the requirements. (*1)
Fan the documents before
loading, or reduce the
number of sheets of the
documents.
Set the paper thickness switch
to the "Normal" position. (*2)
Correctly install the
consumable(Pick roller and
Pad ASSY), if needed. (*3)
Clean the dirty consumable.
(*4)
Replace the consumable,
if needed. (*3)