Changing A Custom Type <X> Name - Dell 5330 User Manual

6
Press the arrow buttons until
7
Press the arrow buttons until
Changing a Custom Type <x> name
You can use the Embedded Web Server or MarkVision
the custom paper types that are loaded. When a Custom Type <x> name is changed, the menus display the new
name instead of Custom Type <x>.
To change a Custom Type <x> name from the Embedded Web Server:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings.
3
Under Default Settings, click Paper Menu.
4
Click Custom Names.
5
Type a name for the paper type in a Custom Name <x> box.
Note: This custom name will replace a custom type <x> name under the Custom Types and Paper Size/Type
menus.
6
Click Submit.
7
Click Custom Types.
Custom Types appears, followed by your custom name.
8
Select a Paper Type setting from the list next to your custom name.
9
Click Submit.
Configure Bins appears, and then press
Link appears, and then press
TM
to define a name other than Custom Type <x> for each of
Loading paper and specialty media
62
.
.