Download  Print this page

Setup Menu - Dell 5330 User Manual

Mono laser printer.
Hide thumbs

Advertisement

Menu item
Factory Defaults
Do Not Restore
Restore Now
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text 1

Setup menu

Menu item
Printer Language
PCL Emulation
PS Emulation
Job Waiting
On
Off
Description
Returns the printer settings to the factory default settings
Notes:
Do Not Restore is the factory default setting. Do Not Restore
keeps the user-defined settings.
Restore Now returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted. Downloads stored in flash memory
or on a printer hard disk are not affected.
Sets a pre-configured or customized message to appear on the
display beside Ready
Notes:
Off is the factory default setting.
IP address and Hostname are pre-configured messages.
Contact Name, Location, Zero Configuration Name, and
Custom Text 1 are messages that can be customized by a
system support person.
Description
Sets the default printer language
Notes:
PCL emulation uses a PCL interpreter for processing print
jobs. PostScript emulation uses a PS interpreter for processing
print jobs.
PCL is the factory default printer language.
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Specifies that print jobs be removed from the print queue if they
require unavailable printer options or custom settings. They are
stored in a separate print queue, so other jobs print normally.
When the missing information and/or options are obtained, the
stored jobs print.
Notes:
Off is the factory default setting.
This menu appears only if a non-Read Only printer hard disk
is installed. This requirement ensures that stored jobs are not
deleted if the printer loses power.
Understanding printer menus
127

Advertisement

Table of Contents

   Related Manuals for Dell 5330

Comments to this Manuals

Symbols: 0
Latest comments: