Download  Print this page

Xps Menu - Dell 5330 User Manual

Mono laser printer.
Hide thumbs

Advertisement

Menu item
Delete Downloads on Disk
Delete Now
Do Not Delete
Job Acct Stat
Print
Clear
Hex Trace
Activate
Coverage Estimator
Off
On
LCD Contrast
1–10
LCD Brightness
1–10

XPS menu

Menu item
Print Error Pages
Off
On
Description
Removes downloads from the printer hard disk, including all held Jobs, buffered
jobs, and parked jobs. Job accounting information is not affected.
Note: Delete Now is the default setting.
Prints a list of all stored job statistics or deletes the information from the printer
hard disk
Notes:
A printer hard disk must be installed in the printer and operating properly for
this menu item to be available.
Selecting Print prints a list of statistics.
Clear deletes all job statistics stored on the printer hard disk.
The Clear selection will not appear if Job Accounting is set to MarkTrack
NPA.
Assists in isolating the source of a print job problem
Notes:
When Activate is selected, all data sent to the printer is printed in hexadecimal
and character representation and control codes are not executed.
To exit or deactivate Hex Trace, turn the printer off or reset the printer.
Provides an estimate of the percentage coverage of black on a page. The estimate
is printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
Adjusts the contrast lighting of the display
Notes:
5 is the factory default setting.
A higher setting makes the display appear lighter.
A lower setting makes the display appear darker.
Adjusts the brightness of the backlight on the display
Notes:
5 is the factory default setting.
A higher setting makes the display appear lighter.
A lower setting makes the display appear darker.
Description
Prints a page containing information on errors, including XML markup errors
Note: Off is the factory default setting.
Understanding printer menus
133
TM
using

Advertisement

Table of Contents

   Related Manuals for Dell 5330

Comments to this Manuals

Symbols: 0
Latest comments: