Download  Print this page

Unexpected Page Breaks Occur; Solving Option Problems; Option Does Not Operate Correctly Or Quits After It Is Installed - Dell 5330 User Manual

Mono laser printer.
Hide thumbs

Advertisement

M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory or an optional hard disk.

Unexpected page breaks occur

Increase the Print Timeout value:
1
From the printer control panel, press
2
Press the arrow buttons until
3
Press the arrow buttons until
4
Press the arrow buttons until
5
Press the arrow buttons until
6
Press the arrow buttons until the value you want appears, and then press

Solving option problems

Settings chosen from the software program or application can change or override settings chosen from the printer
control panel. If an option is not functioning, then make sure it is selected in the software as well as the printer control
panel.

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Check the connection between the option and the printer.
4
Connect the power cord to a properly grounded wall outlet.
M
AKE SURE THE OPTION IS INSTALLED CORRECTLY
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, then reinstall it. For more information, see the hardware setup documentation that came with the option.
.
Settings appears, and then press
Setup Menu appears, and then press
Timeouts appears, and then press
Print Timeout appears, and then press
Troubleshooting
174
.
.
.
.
.

Advertisement

Table of Contents

   Related Manuals for Dell 5330

Comments to this Manuals

Symbols: 0
Latest comments: