Download  Print this page

Too Many Bins Attached; Too Many Disks Installed; Too Many Flash Options Installed; Too Many Trays Attached - Dell 5330 User Manual

Mono laser printer.
Hide thumbs

Advertisement

58 Too many bins attached

1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional bins.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.

58 Too many disks installed

1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the extra disks.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.

58 Too many flash options installed

Too many optional flash memory cards or too many optional firmware cards are installed on the printer.
Try one or more of the following:
Press
to clear the message and continue printing.
Remove extra flash options:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove extra flash options.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.

58 Too many trays attached

1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.

59 Incompatible Duplex

Only options designed specifically for this printer are supported.
Understanding printer messages
161

Advertisement

Table of Contents

   Related Manuals for Dell 5330

Comments to this Manuals

Symbols: 0
Latest comments: