Connect the cables in the following order:
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable
so you can print wirelessly.
If your printer has faxing capabilities, then connect the telephone cable.
Follow the on-screen instructions to complete the software installation.
To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step
8 for each computer.
Installing the printer on a wireless network (Macintosh)
Prepare to configure the printer
Locate the printer MAC address on the sheet that shipped with the printer. Write the last six digits of the MAC
address in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___
Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the power
Enter the printer information
Access the AirPort options.
Additional printer setup