Download  Print this page

Loading Paper And Specialty Media; Setting The Paper Size And Paper Type; Configuring Universal Paper Settings - Dell 5330 User Manual

Mono laser printer.
Hide thumbs

Advertisement

Loading paper and specialty media

This section explains how to load the 250-, 550-, and 2000-sheet trays, and the multipurpose feeder. It also includes
information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.

Setting the Paper Size and Paper Type

The Paper Size setting is determined by the position of the paper guides in the tray for all trays except the multipurpose
feeder. The Paper Size setting for the multipurpose feeder must be set manually. The factory default Paper Type
setting is Plain Paper. The Paper Type setting must be set manually for all trays that do not contain plain paper.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until
4
Press the arrow buttons until
5
Press the arrow buttons until the correct tray appears, and then press
6
Press the arrow buttons until
7
Press the arrow buttons until the correct Paper Type setting appears, and then press
Ready appears.

Configuring Universal paper settings

The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer
menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper
Size menu. Then, specify all of the following Universal size settings for your paper:
Units of measure (millimeters or inches)
Portrait Width
Portrait Height
Feed Direction
Note: The smallest supported Universal size is 70 x 127 mm (2.8 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.).
Specify a unit of measurement
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until
4
Press the arrow buttons until
.
Paper Menu appears, and then press
Paper Size/Type appears, and then press
appears next to the correct size, and then press
.
Paper Menu appears, and then press
Universal Setup appears, and then press
Loading paper and specialty media
49
.
.
.
.
.
.
.

Advertisement

Table of Contents

   Related Manuals for Dell 5330

Comments to this Manuals

Symbols: 0
Latest comments: