Temperature Information; Noise Emission Levels; Static Sensitivity Notice - Dell 5330 User Manual

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult your point of purchase or service representative for additional suggestions.
•
The manufacturer is not responsible for radio or television interference caused by using other than recommended
cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could
void the user's authority to operate this equipment.
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device,
use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach or 1021294
for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC
regulations.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232–3000

Temperature information

Ambient temperature
Shipping temperature
Storage temperature

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Note: Some modes may not apply to your product.
1-meter average sound pressure, dBA
Printing
Scanning
Copying
Ready

Static sensitivity notice

53 dBA; 54 dBA; 55 dBA
N/A
N/A
30 dBA
15–32° C (60–90° F)
-40–60° C (-40–140° F)
1–60° C (34–140° F)
Notices
191