Persistent Fc Id Selective Purging; Purging Persistent Fc Ids; Verifying The Fcdomain Configuration - Cisco Nexus 6000 Series Configuration Manual

Verifying the fcdomain Configuration

Persistent FC ID Selective Purging

Persistent FC IDs can be purged selectively. Static entries and FC IDs currently in use cannot be deleted. The
table below identifies the FC ID entries that are deleted or retained when persistent FC IDs are purged.
Table 1: Purged FC IDs
Persistent FC ID state
Static
Static
Dynamic
Dynamic

Purging Persistent FC IDs

You can purge persistent FC IDs.
Procedure
Step 1
Step 2
Verifying the fcdomain Configuration
Note If the fcdomain feature is disabled, the runtime fabric name in the display is the same as the configured
fabric name.
This example shows how to display information about fcdomain configurations:
switch# show fcdomain vsan 2
Cisco Nexus 6000 Series NX-OS SAN Switching Configuration Guide, Release 6.x
24
Persistent Usage State
In use
Not in use
In use
Not in use
Command or Action
purge fcdomain fcid vsan vsan-id
Example:
switch# purge fcdomain fcid vsan 667
purge fcdomain fcid vsan vsan-id - vsan-id
Example:
switch# purge fcdomain fcid vsan 50-100
Configuring Fibre Channel Domain Parameters
Action
Not deleted
Not deleted
Not deleted
Deleted
Purpose
Purges all dynamic and unused FC IDs in
the specified VSAN.
Purges dynamic and unused FC IDs in the
specified VSAN range.
OL-27932-01