Viewing Port Information; Viewing The Status Of A Port - HP A7533A - Brocade 4Gb SAN Switch Base User Manual

For example:
:
switch:admin> uptime
4:43am
switch:admin>
The uptime command displays the length of time the system has been in operation, the total
cumulative amount of uptime since the system was first powered-on, the date and time of the last
reboot (applies only to Fabric OS 3.x and 2.6.x systems), the reason for the last reboot (applies only
to Fabric OS 3.x and 2.6.x systems), and the load average over the past one minute (1.29 in the
preceding example), five minutes (1.31 in the example), and 15 minutes (1.27 in the example). The
reason for the last switch reboot is also recorded in the system message log.

Viewing port information

Use the commands that follow to view information about ports.

Viewing the status of a port

1. Connect to the switch and log in as admin.
2. Issue the portShow command, specifying the number that corresponds to the port you are
troubleshooting.
In the following example, the status of port two is shown:
switch:admin> portshow 2
portName:
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x4903
portType:
portState: 1
portPhys:
portScn:
port generation number:
portId:
portIfId:
portWwn:
portWwn of device(s) connected:
Distance:
portSpeed: N4Gbps
Interrupts:
Unknown:
Lli:
Proc_rqrd:
Timed_out:
Rx_flushed:
Tx_unavail:
Free_buffer:
Overrun:
Suspended:
Parity_err:
2_parity_err:
CMI_bus_err:
switch:admin>
See the HP StorageWorks Fabric OS 5.x command reference guide for additional portShow command
information, such as the syntax for slot or port numbering.
132 Working with diagnostic features
up 1 day, 12:32, 1 user,
PRESENT ACTIVE E_PORT G_PORT U_PORT LOGICAL_ONLINE LOGIN LED
10.0
Online
6 In_Sync
16 E_Port Trunk port
351
290200
43020004
20:02:00:05:1e:34:01:be
None
normal
0
0
524
0
0
0
0
0
0
0
0
0
0
load average: 1.29, 1.31, 1.27
Link_failure: 50
Loss_of_sync: 55
Loss_of_sig: 54
Protocol_err: 0
Invalid_word: 0
Invalid_crc: 0
Delim_err: 0
Address_err: 0
Lr_in: 100
Lr_out: 50
Ols_in: 50
Ols_out: 52
Frjt: 0
Fbsy: 0