Creating A Zoning Configuration; Adding Zones (Members) To A Zoning Configuration; Removing Zones (Members) From A Zone Configuration; Deleting A Zone Configuration - HP A7533A - Brocade 4Gb SAN Switch Base User Manual

For important considerations for managing zoning in a fabric, and details about the maximum zone
database size for each version of the FOS, see

Creating a zoning configuration

1. Connect to the switch and log in as admin.
2. Issue the cfgCreate command.
3. Issue the cfgSave command to save the change to the defined configuration.
For example:
switch:admin> cfgcreate "NEW_cfg", "redzone; bluezone; greenzone"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y

Adding zones (members) to a zoning configuration

1. Connect to the switch and log in as admin.
2. Issue the cfgAdd command.
3. Issue the cfgSave command to save the change to the defined configuration.
For example:
switch:admin> cfgadd "newcfg", "bluezone"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y

Removing zones (members) from a zone configuration

1. Connect to the switch and log in as admin.
2. Issue the cfgRemove command.
3. Issue the cfgSave command to save the change to the defined configuration.
For example:
switch:admin> cfgremove "newcfg", "redzone"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y

Deleting a zone configuration

1. Connect to the switch and log in as admin.
2. Issue the cfgDelete command.
3. Issue the cfgSave command to save the change to the defined configuration.
"Maintaining zone objects" on page 193.
Fabric OS 5.x administrator guide 191