HP A7533A - Brocade 4Gb SAN Switch Base User Manual page 38

For the SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, Brocade 4Gb SAN Switch for HP
p-Class BladeSystem, and SAN Switch 4/32: The following example shows the command as executed on
a SAN Switch 2/32. The output is similar on SAN Switch 2/8V, SAN Switch 2/16V, Brocade 4Gb SAN
Switch for HP p-Class BladeSystem, and SAN Switch 4/32:
:
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
----------------------------------
FaultyPorts
MissingSFPs
PowerSupplies
Temperatures
PortStatus
ISLStatus
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the prompt is (0..0),
** the policy parameter is NOT applicable to the switch.
** Simply hit the Return key.
The minimum number of
FaultyPorts contributing to
FaultyPorts contributing to
MissingSFPs contributing to
MissingSFPs contributing to
Bad PowerSupplies contributing to
Bad PowerSupplies contributing to
Bad Temperatures contributing to
Bad Temperatures contributing to
Bad Fans contributing to
Bad Fans contributing to
Down PortStatus contributing to
Down PortStatus contributing to
down ISLStatus contributing to
down ISLStatus contributing to
Policy parameter set has been changed
For the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director: Command output includes
parameters related to CP blades.
38 Performing basic configuration tasks
Down Marginal
2 1
0 0
2 1
2 1
Fans 2 1
0 0
0 0
DOWN status: (0..32) [2] 3
MARGINAL status: (0..32) [1] 2
DOWN status: (0..32) [0]
MARGINAL status: (0..32) [0]
DOWN status: (0..2) [2]
MARGINAL status: (0..2) [1]
DOWN status: (0..5) [2]
MARGINAL status: (0..5) [1]
DOWN status: (0..6) [2]
MARGINAL status: (0..6) [1]
DOWN status: (0..32) [0]
MARGINAL status: (0..32) [0]
DOWN status: (0..32) [0]
MARGINAL status: (0..32) [0]