Disabling Topology Discovery - HP A7533A - Brocade 4Gb SAN Switch Base User Manual
Hp storageworks fabric os 5.x procedures user guide (aa-rvhwb-te, september 2005)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (576 pages) ,
- Hardware reference manual (256 pages) ,
- Release note (76 pages)
Table of Contents
Advertisement
For example:
switch:admin> mstdenable
Request to enable MS Topology Discovery Service in progress....
*MS Topology Discovery enabled locally.
switch:admin> mstdenable ALL
Request to enable MS Topology Discovery Service in progress....
*MS Topology Discovery enabled locally.
*MS Topology Discovery Enable Operation Complete!!
Disabling topology discovery
1.
Connect to the switch and log in as admin.
2.
Issue the mstdDisable command to disable the discovery feature locally.
A warning is displayed, informing you that all NID entries might be cleared.
3.
Enter y to disable the discovery feature.
4.
Issue the mstdDisable all command to disable the discovery feature on the entire fabric.
5.
Enter y to complete the disabling of the discovery feature.
For example:
switch:admin> mstddisable
This may erase all NID entries. Are you sure?
Request to disable MS Topology Discovery Service in progress....
*MS Topology Discovery disabled locally.
switch:admin> mstddisable all
This may erase all NID entries. Are you sure?
Request to disable MS Topology Discovery Service in progress....
*MS Topology Discovery disabled locally.
*MS Topology Discovery Disable Operation Complete!!
128 Configuring the Distributed Management Server
(yes, y, no, n): [no] y
(yes, y, no, n): [no] y
Advertisement
Table of Contents
Troubleshooting
