HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 405
Hp storageworks fabric os 6.x administrator guide (5697-0015, may 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (576 pages) ,
- Hardware reference manual (256 pages) ,
- User manual (248 pages)
Table of Contents
Advertisement
The values represent the following:
The name of the zone configuration.
cfgname
The zone name or list of zone names to be added to the configuration.
member
3.
Enter the cfgSave command to save the change to the defined configuration.
switch:admin> cfgadd "newcfg", "bluezone"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n):
[no] y
To remove zones (members) from a zone configuration:
1.
Connect to the switch and log in as admin.
2.
Enter the cfgRemove command, using the following syntax:
cfgremove "cfgname", "member[; member...]"
The values represent the following:
The name of the zone configuration.
cfgname
The zone name or list of zone names to be removed from the
member
configuration.
3.
Enter the cfgSave command to save the change to the defined configuration.
switch:admin> cfgremove "NEW_cfg", "redzone"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n):
[no] y
To delete a zone configuration:
1.
Connect to the switch and log in as admin.
2.
Enter the cfgDelete command, using the following syntax:
cfgdelete "cfgname"
The values represent the following:
The name of the defined zone configuration to be deleted.
cfgname
3.
Enter the cfgSave command to save the change to the defined configuration.
switch:admin> cfgdelete "testcfg"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Fabric OS 6.x administrator guide 405
Advertisement
Table of Contents
Troubleshooting
